Development of an integrated treatment strategy for a leather tannery landfill leachate.

This study aimed at developing an efficient multistage treatment strategy for a complex industrial landfill leachate: a leather tannery landfill leachate. Based on the leachate physicochemical characteristics, the following treatment train was delineated and tested: (i) initial biological process for removal of biodegradable organics, ammonium and alkalinity, (ii) coagulation/flocculation process for total removal of chromium and partial removal of recalcitrant organics and suspended solids, (iii) advanced oxidation process (AOP) or electrochemical AOP (EAOP) for degradation of recalcitrant organics and biodegradability enhancement, and (iv) final biological polishing step. Two initial biological treatment configurations were applied: one comprising nitrification and the other nitrification-denitrification. Coagulation/flocculation was optimized in terms of pH, coagulant dosage (iron(III) chloride) and flocculant nature and dosage. The following AOPs/EAOPs were tested: Fenton, photo-Fenton with UVA or UVC radiation (PF-UVA or PF-UVC), anodic oxidation (AO), electro-Fenton (EF) and photoelectro-Fenton with UVA radiation (PEF-UVA). The biological nitrification-denitrification was beneficial not only because it avoided the need for alkalinity addition during nitrification and decreased the amount of substrate added during denitrification, as expected. Over and above that, it reduced the acid consumption in the coagulation/flocculation, avoided the application of an additional stage comprising nitrites oxidation to nitrates prior to the AOP/EAOP, and improved the efficiency of Fenton's reaction based processes. Following nitrification-denitrification, the coagulation/flocculation was maximized at pH 3.0 and 400 mg Fe L-1 with no flocculant addition. The PEF-UVA process was the best AOP/EAOP. The final leachate fulfilled the discharge limits into waterbodies.

Metal accumulation in roadside soils of Rio de Janeiro, Brazil: impact of traffic volume, road age, and urbanization level.

Traffic-related metal emissions have become a global concern due to their deposition in roadside soils and potential hazardous effects. This study evaluates metal levels in soils adjoining four highways of Rio de Janeiro (Linha Vermelha, Via Dutra, BR-465, and Avenida Brasil), chosen for their diverse traffic volumes, age, and urban/rural settings. In addition to soil physicochemical properties, 11 elements (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sr, V, and Zn) were assessed on samples collected at different distances from the road (1, 3, 5, 10, 15 m) and soil depths (0-15 and 15-30 cm). Moreover, the geoaccumulation index was also computed to infer the soil contamination extent. The results indicate that soil metal levels at each highway are highly dependent on factors like traffic volume, distance to road, other anthropogenic sources of pollution, and their rural or urban location. The highways with greater traffic volume, Linha Vermelha and Avenida Brasil (154,000 and 126,000 vehicles day-1, respectively), clearly presented the highest soil metal concentrations. Still, as stressed by the principal component analysis, traffic volume alone fails to explain the distribution of metals in soils neighboring these highways. Thus, factors like their urban setting and larger exposure to anthropogenic activities may play a pivotal role. On the other hand, soils from Via Dutra and BR-465, both on a rural backdrop, were mostly influenced by traffic as their metal levels decreased with increasing distances from the road. Comparison with reference and preventive values for Brazilian soils and the assessment of the geoaccumulation index have shown that concentrations of Pb and V have reached concerning thresholds at Linha Vermelha and Avenida Brasil.

Hydrogen and methane production in a two-stage anaerobic digestion system by co-digestion of food waste, sewage sludge and glycerol.

In this study, hydrogen and methane production from co-digestion of food waste (FW), sewage sludge (SS) and raw glycerol (GL) was evaluated in a two-stage acidogenesis-methanogenesis anaerobic system under mesophilic conditions (35 °C). The effect of glycerol addition (1 and 3% v/v) as co-substrate was assessed in ternary mixtures (FW + SS + GL), with the concentration of all substrates kept at 10 g VS/L. Besides contributing to reduce the lag phase of the acidogenic bacterial culture, the presence of GL increased the hydrogen production in all tested conditions and the maximum hydrogen yield was obtained for the FW + SS + 3%GL mixture (179.3 mL H2/g VS). On the other hand, the highest methane production (342 mL CH4/g VS) was achieved in the test supplemented with 1% GL. At 3% GL, abrupt reductions in the biogas CH4 content and pH values resulting from instability in methanogenesis process were noticed over the experiment. By taking into account the hydrogen and methane production stages, the highest energy yield (i.e., 15.5 kJ/g VS) was obtained with the ternary mixture containing 1% GL. Overall, the results of this study demonstrate the feasibility of using glycerol as co-substrate to increase the H2 and CH4 production efficiency in a two-stage anaerobic co-digestion process, allowing simultaneous treatment of three residues (FW, SS and GL) and energy production.

Applying value analysis and fuzzy logic to select areas for installing waste fills.

This article discusses a methodology for assessing and ranking a predefined universe of objects to assist in the selection of suitable areas for the construction of sanitary landfills. The methodology is, in principle, for universal application. Its development was initially based on the 'Value Analysis' methodology and then on the 'Fuzzy Eigenvector Method', or 'Fuzzy Logic' as it is sometimes referred to. The focus of the study herein is on the comparative appraisal of a group of elements which are part of the guidelines to be adopted when determining the choice of the most suitable site for a sanitary landfill. This set of guidelines includes technical, economical, environmental, social and political aspects. As an example of the methodology proposed, four different areas were chosen. They were studied to determine which is the most appropriate site for the development of a new solid waste fill site. The results for these four areas, together with the functions chosen and function weights, are presented here.